fluidnc
https://github.com/bdring/fluidnc
C++
The next generation of motion control firmware
Triage Issues!
When you volunteer to triage issues, you'll receive an email each day with a link to an open issue that needs help in this project. You'll also receive instructions on how to triage issues.
Triage Docs!
Receive a documented method or class from your favorite GitHub repos in your inbox every day. If you're really pro, receive undocumented methods or classes and supercharge your commit history.
C++ not yet supported1 Subscribers
Add a CodeTriage badge to fluidnc
Help out
- Issues
- Problem: (Generic) ModbusVFD (RS485) does not transmit frequency setting command
- Problem: gpio.14 (integrated esp32) does not change state. Plasma branch f/w.
- Problem: controller crashes after running-code
- Problem: Probing was skipped randomly, for the 1st tool change, before going for tool change in atc_manual macro.
- Problem: _current_tool values when using M6 Macro
- During startup, only one hard limit axis is shown at a time.
- Problem: Run Macro $X when Alarm
- Problem: job running from SD stalls if wifi conection is lost
- Problem: Unable to move any axis - Motor leds stay off
- Feature: gcode clustering support for faster engraving
- Docs
- C++ not yet supported